- Description
- Documents
Comtesse Sailing Yacht Kit
The Comtesse is the image of a typical sailing yacht of the 70s and 80s.
These rugged, mostly GRP boats still make up the classic image of marinas across
Europe. There are numerous models from diverse shipyards and on the basis of
this shapely hull many original yachts can certainly be modelled and equipped
with numerous individual details.
At the same time, this shapely yacht offers very good sailing characteristics
for the demanding sailor and is ideal for a relaxed afternoon at the lake.
Thanks to its streamlined hull with moulded keel fin, the elegant Comtesse
achieves remarkable speeds in light wind conditions. But even with stronger
breezes can be easily sailed, as it is a capsize-safe keel boat. With its simple
design and balanced handling, it will make it much easier for newcomers to model
sailing.
With Comtesse, of course, all courses, from “cruising” against the wind to
sailing “in front of the wind”, can be sailed effortlessly using the rudder and
the sail adjustment, so that any point can be controlled and then sailed back to
the starting point. The fittings set contains many visible fittings such as
lamps, wheel and parts for the steering column, winches, stanchions and more.
The pictured wing keel is an optional part that significantly improves the
sailing characteristics and righting moment of the Comtesse. This keel is also a
good option for many other sailboats.
Kit Contents
- One-piece ABS hull (no bonding of the hull and deck required) with integral
keel fin
- Deep drawn cockpit and sliding hatch
- Lasered frames and parts for interior work as well as sliding hatch and boat
stand
- Ready-to-install plastic rudder with shaft
- Ready-cut sail, one-piece aluminum mast, aluminum booms
- All fittings for the sail
- Detailed construction manual
Technical specifications
Length about 950 mm
Width about 230 mm
Height about 1500 mm
Total displacement 3200 g
Mast height about 1200 mm
Sail area 30 dm2
Draft 210 mm
Ballast content 1800 g
RC-functions
Rudder control, Sail adjustment, motor control (optional).
Accessories
ro1073 fitting set Comtesse
roF2201 2-channel remote control 2.4 GHz
79054 Servo for rudder
79073 Sailing winch Windforce 1006MG
60102 Ballast (1 kg) 2x
667239 Receiver power supply
Optional accessories:
ro1074 Drive set Comtesse
67051 Speed Controller WP1060
79019 4-channel remote control Set (Instead of roF2201)
677239 or 667242 battery 6V - 7,4V
ro1072 wing keel for deeper center of gravity
When using the wing keel only 2x ballast 0,5kg are needed.
Experience level assembly (1=very easy ... 5=experts only) | |
2 simple | ** |
Category | |
RC Model | |
Experience level usage | |
Advancer | ++ |
Power unit | |
Sails | |
Dimensions | |
Total length | 950 mm |
Beam | 230 mm |
Height | 1500 mm |
Weight | 3200 g |
Design | |
Materials hull | ABS |
Materials superstructure | ABS |
Hull design | ABS tiefgezogen |
The ship model division of Robbe Modellsport has been owned by Krick
Modelltechnik since summer 2015. The former Robbe products will be marketed from
2016 under the brand "romarin by krick".
We have taken over almost all the designs and forms around ship model
construction and we will endeavor to re-launch the attractive ship models and
the important accessories from the Robbe range and thus make the ship model
construction even more lively.
Starting with the important starter models Katja and Dolly, over the fast
motoryachts like the Najade, up to the Feuerlöschboot Dusseldorf or
Hochweeschler Happy Hunter we want to expand the program step by step. And
especially the important accessories will not be missing. Certainly, this will
take some time, since Robbe's inventory could be reduced to little. We are
constantly updating articles.
A regular visit to our homepage in the "New articles" section is therefore
worthwhile.