- Description
- Movie
- Documents
Liman 2 - Wooden kit
Historical steam tug in scale 1:20
The Istanbul Port Company commissioned the Dutch company Kreber to build the
tug Liman 2 in 1935. The tug was used continuously as a harbour tug until 1988,
helping larger ships to enter and leave the port of Istanbul. The ship was
bought by a museum in 1991 and restored. The 19-metre-long, 50-tonne tug was
powered by a 170-horsepower steam engine. Currently, excursions with the steam
tug are still occasionally offered.
Sources:
RMK Museum Istanbul and
RMK Marine Shipyard.
The kit is made of plywood with keel and frames and
abachi planking strips. The superstructure is made with complete interior
fittings from laser-cut wooden parts and details in resin 3D printing. With the
lighting kit included in the kit, the model can be lit with LEDs both internally
and externally. The kit is basically designed as a floor model, but is quite
suitable for use on the water with propulsion and remote control. A list of the
accessories required for conversion to a floatable RC model can be found below.
The rich hardware set is made of very detailed 3D impression parts.
We
include printed instructions with German translation of the texts and parts list
together with supplementary information. The building instructions and parts
list in English from Türkmodel can be downloaded from the "Documents" tab.
Technical data
Scale 1:20
Length 1000 mm
Width
250 mm
Height 276 mm
The following additions are necessary for upgrading as an RC model:
Article no.
roF2201 Remote control min. 2 channels
79054 Steering servo
42253 Electric motor MAX Power 650
42128 Interference suppression kit
51022 Motor fixing screws M3x10mm ro1443 Shipshaft
ro1471 3-blade ship's
propellers 50 mm
63902 Coupling 3.17/4mm.
67053 Speed controller
67069
Programming box for speed controller
67518 T-Plug plugs and sockets
667320
LiPo battery 11,1V 5200 mAh or
667253 Lead-acid battery 6V 3.4Ah (requires 2
in series) + connector sockets ro4039
67521 Motor connection plug
67537
2-wire cable 1.5 qmm
The following accessories are recommended for switching the lights
supplied with the kit via the remote control:
Item no.
67202 Duo
Switch for independent switching of 2 loads or
67204 Quadro Switch for
switching a maximum of 4 loads
67522 BEC plug with cable (VE2) is required
2x for Duo Swich and 3x for Quadro Switch
Please note: A remote control with a minimum of 4 channels
is required for switching special functions. For example:
Article no.
79009 6-channel remote control Reflex II RC set with transmitter
and receiver
Experience level assembly (1=very easy ... 5=experts only) | |
3 Experienced | *** |
Category | |
Static model | |
RC Model | |
Power unit | |
Electric motor | |
Dimensions | |
Scale | 1:20 |
Total length | 1000 mm |
Beam | 250 mm |
Height | 276 mm |
Design | |
Materials hull | Holz |
Materials superstructure | Holz |
Hull design | Spanten |