- Description
- Documents
- Movie
Prototypical RC model of a motorsport boat in scale 1:10
Fittings kit included in the kit
The Florida 26 is the prototypical replica of a modern sports boat. Equipped
with a powerful inboard engine and Z-drive, these boats reach very high speeds
while offering the comfort of large yachts.
The Florida 26 can be assembled very quickly with its pre-formed white ABS
thermoformed parts and laser-cut parts. For the drive, the kit is equipped with
the proven Z-Drive and the Navy Direkt 2000 assembly unit, which ensures
particularly fast and accurate assembly.
Beautiful new details, such as the laser-cut windscreen frame, especially
detailed seats, true-to-the-original steering wheel and much more make this
model a special eye-catcher even when close-up. Masking film for the lettering
and a decal sheet for further details together with detailed building
instructions complete this kit.
Scope of delivery
- thermoformed plastic hull
- thermoformed plastic deck and superstructure parts
- transparent, deep-drawn glazing
- Laser-cut plastic parts for RC installation
- Stern tube with shaft and propeller
- Accessories for engine and RC installation
- Rudder system
- Complete set of fittings
- Decal sheet
- Multilingual, illustrated building instructions
- Boat stand
Paints and adhesives are not included
Technical data
Scale 1:10
Length 720 mm
Width 230 mm
Total displacement 1600 g
Two drive variants are recommended. For hobby pilots, the Florida already
reaches remarkable speeds with the standard drive. If you want more, you will
get your money's worth with the brushless drive.
Accessories required for the standard drive system
Order No. Description
42124 - Electric motor MAX Power 600
ro1447 - Direct coupling 3.2/4 mm
42122 - Water cooling coil
42128 - Interference suppression kit
67051 - Speed controller Quicrun
Required accessories for the Brusless drive
Order No. Description
42411 - BL motor MAX Runner
ro1450 - Direct coupling 5/4 mm
42122 - Water cooling coil
70917 - Silicone hose for water cooling
67072 - Speed controller Seaking 60A
70917 - Silicone hose for water cooling
For both versions additionally needed:
Order no. Designation
roF2201 - 2-channel remote control 2.4 GHz
79054 - Servo for steering
667320 - Drive battery 11.1V (LiPo battery 3S /5200 mAh)
Suitable charger for the drive battery used
Cables and connectors
Tools and aids:
- Sandpaper of different grit
- Sharp modelling knife
- Drill holder
- Drill bits D 1.0; 1.5; 2; 3; 4 and 6 mm
- Soldering iron and solder
- metal file
- Metal saw
- Adhesive tape
- staples
- Foam rubber strips for padding the stand
- Possibly motor connection cable and plug
Adhesives and varnish:
Order no. Description
44050 . Roket HOT superglue
ro5015 - Pattex Stabilit Express
Colour choice as desired
Experience level assembly (1=very easy ... 5=experts only) | |
2 simple | ** |
Category | |
RC Model | |
Experience level usage | |
Advancer | ++ |
Power unit | |
Electric motor | |
Dimensions | |
Scale | 1:10 |
Total length | 720 mm |
Beam | 230 mm |
Height | 230 mm |
Weight | 1600 g |
Design | |
Materials hull | ABS |
Materials superstructure | ABS |
Hull design | ABS tiefgezogen |
The ship model division of Robbe Modellsport has been owned by Krick
Modelltechnik since summer 2015. The former Robbe products will be marketed from
2016 under the brand "romarin by krick".
We have taken over almost all the designs and forms around ship model
construction and we will endeavor to re-launch the attractive ship models and
the important accessories from the Robbe range and thus make the ship model
construction even more lively.
Starting with the important starter models Katja and Dolly, over the fast
motoryachts like the Najade, up to the Feuerlöschboot Dusseldorf or
Hochweeschler Happy Hunter we want to expand the program step by step. And
especially the important accessories will not be missing. Certainly, this will
take some time, since Robbe's inventory could be reduced to little. We are
constantly updating articles.
A regular visit to our homepage in the "New articles" section is therefore
worthwhile.