Item no.: 20215
New Edition! Now available again.
This single-cylinder steam engine was developed mainly as a propulsion for our steamship Anna. With its compact design and stagnant boiler, the steam engine is a real eye-catcher and a technical highlight for the small steamboat. Of course, the machine is also suitable as a drive other model boats with about 50 cm in length or displacement of 1-2 kg.
The steam engine is delivered completely pre-assembled. The boiler is ready soldered, pressure tested and painted. The steam line is already installed. The operation was deliberately kept very simple. Fill water into the boiler, heat up and start the machine on the flywheel. About the small handwheel still the amount of steam can be adjusted and off you go. Esbit tablets are used as fuel.
Including the delivery
Steam engine with boiler mounted on the floor panel
Fire bowl with handle
Evaporating pipe with union nut
Syringe for filling in the water
Dimension base plate approx. 135x70 mm
Total height about 170 mm
Total length about 182 mm
Height steam engine about 83 mm
Wide steam engine about 54 mm
Weight empty approx. 600 g
Diameter output shaft 4 mm
Height of output shaft measured about 15 mm from the bottom plate
60106 Esbit tablets
492368 Super smooth running oil with anti-drip valve
- Distilled water
As optional accessories the following parts are available:
22063 exhaust steam condenser
22061 insulating plate
22062 driving clutch