- Description
- Documents
Policeboat W3 kit 1:25 with fittings set from romarin
The model was presented to the public for the first time at this year's Intermodellbau in Dortmund. The model is currently still in the prototype stage and it will be several months before the finished kit is available in stores. If you are interested in the kit, please subscribe to our newsletter.
We decided in favour of the new edition of this former Robbe design because
we were impressed by the elegant, slender hull shape with the harmonious ship's
superstructure, which also offers many design options for individual
modifications from coastal watchboats of various kinds to an elegant classic
motor yacht.
At the same time, this large and sleek hull offers many
special function options such as lighting and crane operation.
The most important features
- Deep-drawn hull and deck with coaming, wind deflector and chimney made of ABS
- Transparent superstructure with marked windows and doors with laser-cut window masks
- Laser-cut wooden and plastic parts for engine installation and all superstructure parts.
- Complete two-blade propeller system, 2 counter-rotating 3-blade propellers
- injection-moulded mast with moulded details and space for wiring inside
- laser-cut railing supports and portholes
- detailed anchor winch and other fitting parts produced using high-quality resin 3D printing
- fitting and accessory parts, dinghy made of blown ABS
- detailed building instructions and construction plan
Technical Data
Length overall: 900 mm
Width: 175m m
Draught: approx. 70mm
Displacement: 3.5 kg
Height above water: 450 mm
Required drive motors:
42275 MAX Gear geared motor 2.5:1
(2 pcs.) or
42437 Brushless motor MAX Marine P365 550 KV (2 pcs.)
Information about the original
The police boat W-3 belonged to the fleet of the Lower Saxony Water Police
until 2000 and was stationed in the outer harbour of Emden.
The ship was
built at the shipyard Gebr.Schürenstedt, Bardenfleth. Its main task was to
monitor and secure coastal shipping traffic, particularly in the area of the
entrance to Emden harbour.
The boat was decommissioned in 2000 and replaced
by a new vessel, which also bears the service designation W-3. The old ship
became private property.
Technical data of the original
Length overall: 22.50 m
Width: 4.30 m
Draught: 1.49 m
Displacement: 49.3 tonnes
Height above water: 9.60 m
| Experience level assembly (1=very easy ... 5=experts only) | |
| 3 Experienced | *** |
| Category | |
| RC Model | |
| Experience level usage | |
| Advancer | ++ |
| Power unit | |
| Electric motor | |
| Dimensions | |
| Scale | 1:25 |
| Total length | 900 mm |
| Beam | 175 mm |
| Weight | ca. 3500 g |
| Design | |
| Materials hull | ABS |
| Materials superstructure | ABS |
| Hull design | ABS tiefgezogen |
The ship model division of Robbe Modellsport has been owned by Krick
Modelltechnik since summer 2015. The former Robbe products will be marketed from
2016 under the brand "romarin by krick".
We have taken over almost all the designs and forms around ship model
construction and we will endeavor to re-launch the attractive ship models and
the important accessories from the Robbe range and thus make the ship model
construction even more lively.
Starting with the important starter models Katja and Dolly, over the fast
motoryachts like the Najade, up to the Feuerlöschboot Dusseldorf or
Hochweeschler Happy Hunter we want to expand the program step by step. And
especially the important accessories will not be missing. Certainly, this will
take some time, since Robbe's inventory could be reduced to little. We are
constantly updating articles.
A regular visit to our homepage in the "New articles" section is therefore
worthwhile.
Klaus Krick Modelltechnik
Industriestr. 1
75438 Knittlingen
Deutschland
info@krick-modell.de
Products not suitable for children under 3 years of age.
