San Diego Mega Yacht

Item no.:  ro1045
San Diego Mega Yacht - Image 1
San Diego Mega Yacht - Image 2
San Diego Mega Yacht - Image 3
San Diego Mega Yacht - Image 4
San Diego Mega Yacht - Image 1San Diego Mega Yacht - Image 2San Diego Mega Yacht - Image 3San Diego Mega Yacht - Image 4
235,00 EUR
incl. VAT and excl. shipping
Total amount: {{ totalPrice }} EUR
currently not available
This item notice Article is noted
Availability: (Delivery time: )
Shipping surcharge per pcs.: 5,95 EUR * + possibly any surcharge depending on shipping
  • Description
  • Documents

SAN DIEGO Semi Scale of a Mege Yacht scale 1:25

With its sleek design, the San Diego delivers a fantastic ride that is in no way inferior to its original. The large hull length of 1.27 m and the slim design make for a great and faithful appearance on the water, which reflects the elegance of such luxury yachts. Equipped with two powerful electric motors (frame sizes 700 to 800) that drive two counter-rotating surface ship propellers directly, the
San Diego starts to plane contact after a short acceleration phase. Pivoting Navy Speed drives on the one hand allow a very good directional stability, on the other hand a high maneuverability even with moving water. With the fitting kit, the luxurious features of the original boat can be completely replicated in the model.
 
Delivery
- Hull and deck deep drawn from plastic, with moulded spray rails.
- 2 Navy Speed direct drives
- 2 Navy 44 universal joint couplings
- 2 stern tubes with shafts
- Rubbing strips, high coaming
- Superstructure can be removed in one piece, individual parts of the superstructure are made of transparent plastic
- Laser cut plastic parts for interior fitting and fly bridge
- RC parts, decals
- Detailed construction manual

Accessories
ro1046 Fitting set kit San Diego
 
Tecnical data
Length about 1270 mm
Width about 250 mm
Height about 370 mm
Total displacement about 5000 g
 
RC functions
Rudder control, engine control
Optional accessories for Radio Control
itemno.
roF2201 2-channel remote control 2.4 GHz
79059  Servo for rudder
42435 Max Marine P357 1250kv electric motor 2x
67071 Speed control Seaking 30A 2x
79114 V-cable
ro1446 High load coupling 2x
667320 LiPo battery 11,1V 5200 mAh 1-2 pcs

The complete accessory recommendations can be found in the constructionmanual for the model.


Note on the shipping of the item:
Due to the dimensions of the model ( > 120 cm), shipping is carried out by DPD. There is a surcharge per kit for this. Shipping with other providers is possible with bulky goods surcharge is possible within Germany. The bulky goods surcharge per package is calculated at approx. 28 euros per package. (As the status Dec. 2021.)

Experience level assembly (1=very easy ... 5=experts only)
3 Experienced ***
Category
RC Model
Experience level usage
Advancer +
Power unit
Electric motor
Dimensions
Scale 1:25
Total length 1270 mm
Beam 250 mm
Height 370 mm
Weight 5000 g
Design
Materials hull ABS
Materials superstructure ABS
Hull design ABS tiefgezogen

The ship model division of Robbe Modellsport has been owned by Krick Modelltechnik since summer 2015. The former Robbe products will be marketed from 2016 under the brand "romarin by krick".

We have taken over almost all the designs and forms around ship model construction and we will endeavor to re-launch the attractive ship models and the important accessories from the Robbe range and thus make the ship model construction even more lively.

Starting with the important starter models Katja and Dolly, over the fast motoryachts like the Najade, up to the Feuerlöschboot Dusseldorf or Hochweeschler Happy Hunter we want to expand the program step by step. And especially the important accessories will not be missing. Certainly, this will take some time, since Robbe's inventory could be reduced to little. We are constantly updating articles.

A regular visit to our homepage in the "New articles" section is therefore worthwhile.