?Scale model of an ocean-going salvage tug to 1 : 50 scale
The Happy Hunter is a scale reproduction of a Dutch ocean-going salvage tug
to a scale of 1 : 50.
The boat is powered by a direct-drive, i.e. non-geared system, in the form of two high-torque MAX Power 700 electric motors. These are low-revving power plants driving a pair of high-performance marine propellers. Fixed Kort nozzles increase thrust, and the boat is capable of carrying out extremely arduous towing tasks and complex manoeuvres in conjunction with the bow thruster, which is an optional accessory. The capacious plastic hull allows the modeller to install numerous auxiliary working systems, and experienced builders will enjoy fitting out the Happy Hunter with a working lighting system, radar, anchor winch, sound system and towing mechanism. It is even possible to install a fully working crane; the crane itself is included in the kit.
• Vacuum-moulded white ABS plastic hull and superstructure
• Die-cut parts for deck and superstructure
• Laser-cut parts for power system mountings and electronic component supports
• Complete rudder system
• Injection-moulded Kort nozzles
• Small hardware items
• Components for foremast, mainmast, crane etc.
• Decal sheet
• Building instructions with drawings and photographs
Length approx. 1035 mm
Width approx 235 mm
Total displacement approx. 9500 g
Draught 120 mm
Rudder, Motor control, Lighting systems, Auxiliary working systems
ro1107 Fitting Set Happy Hunter
ro1108 Power Set Happy Hunter
roF4009 F14 Navy 4/8/1 40MHz
67052 ESC WP 860 Dual 1x or 2x
ro108-05 Bow Thruster
667256 Lead batteries 6V / 12Ah 2x
ro1465 Dynamic Propp.3-Blade D60R
ro1464 Dynamic Propp.3-Blade D60L
A complete list of recommended accessories is included in the technical documentation supplied with the model or under the point "Documents" on this page
|Experience level assembly (1=very easy ... 5=experts only)|
|4 very eperienced||****|
|Experience level usage|
|Total length||1035 mm|
|Weight||ca. 9,5 kg|
|Hull design||ABS tiefgezogen|
The ship model division of Robbe Modellsport has been owned by Krick
Modelltechnik since summer 2015. The former Robbe products will be marketed from
2016 under the brand "romarin by krick".
We have taken over almost all the designs and forms around ship model construction and we will endeavor to re-launch the attractive ship models and the important accessories from the Robbe range and thus make the ship model construction even more lively.
Starting with the important starter models Katja and Dolly, over the fast motoryachts like the Najade, up to the Feuerlöschboot Dusseldorf or Hochweeschler Happy Hunter we want to expand the program step by step. And especially the important accessories will not be missing. Certainly, this will take some time, since Robbe's inventory could be reduced to little. We are constantly updating articles.
A regular visit to our homepage in the "New articles" section is therefore worthwhile.