- Description
- Documents
FLB-1 - Remote-controlled model of a fire-fighting boat on a scale of 1:25.
The FLB-1 is a model of a fire-fighting boat stationed in Neuss. It was put
into service in 1983 and has been in service on the Rhine ever since. The ship
is used for fire protection and rescue services. Due to its relatively compact
construction, strong motorisation and the many details and functional
possibilities, it has become a beautiful model that is not difficult to build
and at the same time allows many special functions.
Thus, there are great
possibilities for the advanced beginner as well as for the experienced modeller.
There is something for everyone in terms of detail and variety, but also for the
actions on the water. The separately available fittings set has been expanded
with many small details, which are produced in 3D resin and are very precisely
executed, and brought up to the latest technical standard.
Contents of delivery
- Hull made of thermoformed ABS plastic
- Superstructure, bulwark
and small parts made of thermoformed ABS
- Laser-cut deck and
superstructure parts, easy to assemble
- Laser-cut built-in parts for the
interior of the fuselage
- Complete rudder system
- Stern tube with shaft,
coupling and propeller
- All parts for the fire fighting monitors, without
functional parts
- Decal sheet and plotted lettering
- Building
instructions with construction drawings
The fittings set with all lamps,
headlights, railing supports, radar, loudspeakers, anchor winch must be
purchased separately.
RC functions
Rudder control
Engine control
Special functions:
- Radar
- Illumination
- Extinguishing monitor
Technical data
Scale 1:25
Length approx. 690 mm
Width approx. 175
mm
Total displacement approx. 2600 g
RC functions Rudder control, motor
control, special functions
Accessories
ro1092 Fitting
set FLB-1
Further optional accessories
ro1093 Deck
detail set with pre-cut decks with tear sheet structure. For an even more
orignal look, the textured deck parts can be glued and painted onto the deck
aqus the kit.
Required accessories for driving
42124
Max Race 400 electric motor
42128 Suppression kit
67051
Speed controller Quicrun 1060
79050 or 79054 Rudder servo
Remote control
from 2-channel
(for special functions from 4-channel)
In addition,
paints, adhesives, cables, connectors, etc. are required. Please refer to the
accessories list for details.
The kit is expected to be delivered from July 2020. If you would like to reserve a copy, send us an e-mail with your address or customer number.
Experience level assembly (1=very easy ... 5=experts only) | |
3 Experienced | *** |
Category | |
RC Model | |
Experience level usage | |
Beginner | ++ |
Power unit | |
Electric motor | |
Dimensions | |
Scale | 1:25 |
Total length | 690 mm |
Beam | 175 mm |
Weight | ca. 2600 g |
Design | |
Materials hull | ABS |
Materials superstructure | ABS |
Hull design | ABS tiefgezogen |
The ship model division of Robbe Modellsport has been owned by Krick
Modelltechnik since summer 2015. The former Robbe products will be marketed from
2016 under the brand "romarin by krick".
We have taken over almost all the designs and forms around ship model
construction and we will endeavor to re-launch the attractive ship models and
the important accessories from the Robbe range and thus make the ship model
construction even more lively.
Starting with the important starter models Katja and Dolly, over the fast
motoryachts like the Najade, up to the Feuerlöschboot Dusseldorf or
Hochweeschler Happy Hunter we want to expand the program step by step. And
especially the important accessories will not be missing. Certainly, this will
take some time, since Robbe's inventory could be reduced to little. We are
constantly updating articles.
A regular visit to our homepage in the "New articles" section is therefore
worthwhile.