- Description
- Documents
Smit Nederland tug NEW EDITION
Revised kit now with 2 brass Becker rudders
The Smit Nederland was built in 1979 by the BV Scheeps shipyard & machine factory "De Merwede" in Hardinxveld, Holland. Length 28.40 m, beam 8.85 m, draught 3.85 m. She is powered by two "Stork Werkspoor" diesel engines, which produce 1,800 hp at 1000 rpm. 1,800 hp. The speed is 12 knots with an action radius of 2,250 nautical miles. A special feature of the original are the adjusting screws running in a jacket tube, as well as two transverse thrusters, which give the ship good manoeuvrability.
This kit features a deep-drawn ABS hull and laser-cut wooden parts. The revised kit now includes 2 brass Becker rudders. Together with cort nozzles, ship's shafts with stern tube and brass propellers, the propulsion system is designed for 2 MAX Power 600 electric motors. All fitting parts are included with building plan and instructions.
Technical data:
Scale 1:33
Length 870mm
Width 270mm
Height 520mm
Necessary accessories (not included)
42124 MAX Power 600 electric motor 2x
42128 Interference suppression capacitors (set) 2x
63702 Shaft coupling 3.18 to 4 mm 2x
ro4070 Motor mount 600 (540) 2x
667256 Lead battery 6V 12 Ah as power supply for the motors
67053 Speed controller WP880 Dual
79059 Servo for rudder system
67521 Motor connection round plug set
ro4039 Battery connector flat plug set
67537 Twin wire 1,5 qmm cross section
Remote control min. 2 channels
Colours and adhesives
Required colours
BCA008 Brunswick green 22 ml Billing Boats
BCA010 Matt Lemon 22 ml Billing Boats
BCA011 Black 22 ml Billing Boats
BCA012 Pale grey 22 ml Billing Boats
BCA013 Trainer yellow 22 ml Billing Boats
BCA014 Matt white 22 ml Billing Boats
BCA017 Clear lacquer 22 ml Billing Boats
BCA018 Mediterranean blue 22 ml Billing Boats
BCA021 Crimson red 22 ml Billing Boats
BCA023 Copper 22 ml Billing Boats
BCA030 Dark Ad grey 22 ml Billing Boats
BCA036 Mahogany 22 ml Billing Boats
Experience level assembly (1=very easy ... 5=experts only) | |
3 Experienced | *** |
Category | |
RC Model | |
Experience level usage | |
Advancer | ++ |
Power unit | |
Electric motor | |
Dimensions | |
Scale | 1:33 |
Total length | 870 mm |
Beam | 270 mm |
Height | 520 mm |
Design | |
Materials hull | ABS tiefgezogen |
Materials superstructure | Holz |