Taylorcraft Electric R/C Kit

Taylorcraft Electric R/C Kit from Dumas

Here is a beautiful model of the Taylorcraft, designed by Pat Tritle. Designed to use stock off the shelf flying hardware for easy affordable flight.

Kit features:
Laser cut parts
Hand-selected balsa
Full size plans
Step-by-step instructions
Vacuum-molded parts
Lightweight colored tissue

This is the radio controlled, electric powered Dumas Taylorcraft Park Flyer Kit.


FEATURES:

Construction: Hand selected laser cut balsa
Vacuum molded cowl
Rudder and Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, tail wire skid requires bending


INCLUDES:

All balsa, lightweight colored (blue and yellow) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, tail wire skid, lightweight plastic tail wheel, CA hinges and all hardware to complete kit, instruction manual, two full-size plan sheets, acetate sheet for windows and vacuum molded cowl.


REQUIRES:

GWS IPS (indoor power system) motor with "A" ratio gear drive GWSG2023
3 channel radio system (minimum)
2 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 8x6 prop, GWSQ2017
Building and field equipment


SPECIFICATIONS

Length: 23-7/8" (606mm)
Wingspan: 40" (1016mm)
Wing Area: 272sq.in. (17.57 sq dm)
Airfoil: Flat bottom
Center of Gravity (CG): 1-7/8" (48mm) back from the leading edge of the wing
Control Throws:
Elevator, Up and Down: 3/4" (19mm)
Rudder, Left and Right: 7/8" (22mm)