Item no.: ds1813
- Description
Dumas Aeronca C-3 Park Flyer Kit
We are pleased to introduce the Aeronca C-3, designed by Pat Tritle. Designed to use stock off the shelf flying hardware for easy affordable flight.
Kit features:
1 Laser cut parts
Hand-selected balsa
Full size plans
Step-by-step instructions
Vacuum-molded parts
Lightweight colored tissue
Rudder Control: Pull-pull cables
Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16 inch diameter wire front, .041 diameter wire rear, requires bending
FEATURES
Construction: Hand selected laser cut balsa
Vacuum molded nose cowl
Rudder Control: Pull-pull cables
Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, .041 diameter wire rear,
requires bending
INCLUDES
All balsa, lightweight colored (black and yellow) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, CA hinges and all hardware to complete this kit, instruction manual, two full-size plan sheets, and acetate sheet for windows
REQUIREMENTS
GWS IPS (indoor power system) motor with "A" ratio gear drive
GWSG2023
3 channel radio system (minimum)
2 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 8x6 prop, GWSQ2017
Building and field equipment
SPECIFICATIONS
Length: 22" (559mm)
Wingspan: 40" (1016mm)
Wing Area: 329 sq.in. (21.25 sq dm)
Airfoil: Flat bottom, high wing placement
Center of Gravity (CG): 2.5" (63mm) back from the leading edge of the wing at the fuselage side
Control Throws:
Elevator, Up and Down: 3/4" (19mm)
Rudder, Left and Right: 1" (25mm)
Building difficulty level (1=very easy.... 5=for experts | |
3 experienced | *** |
Usage experience level | |
Beginner | ++ |
Remote control | |
Radio controlled model | |
Power unit | |
Electric motor | x |
Technical data | |
Wingspann | 1016 mm |
Total length | 559 mm |
Wing area | 21,25 qdm |
Construction / materials | |
Materials hull | Holz Lasercut |
Materials wings | Holz Lasercut |
Constructions hull | Spanten und Leisten, Motorhabe tiefgezogen |
Constructions wings | Rippenbauweise |
Covering | Papier in gelb und schwarz enthalten |
Remote functions | |
Ruder | x |
Elevator | x |
Engine | x |