Aeronca C-3 Parkflyer Kit

Item no.:  ds1813
Aeronca C-3 Parkflyer Kit - Image 1
96,00 EUR
incl. VAT and excl. shipping
Total amount: {{ totalPrice }} EUR
currently not available
This item notice Article is noted
Availability: (Delivery time: )
  • Description
Dumas Aeronca C-3 Park Flyer Kit

We are pleased to introduce the Aeronca C-3, designed by Pat Tritle. Designed to use stock off the shelf flying hardware for easy affordable flight.

Kit features:
1 Laser cut parts
Hand-selected balsa
Full size plans
Step-by-step instructions
Vacuum-molded parts
Lightweight colored tissue
Rudder Control: Pull-pull cables
Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16 inch diameter wire front, .041 diameter wire rear, requires bending


FEATURES

Construction: Hand selected laser cut balsa
Vacuum molded nose cowl
Rudder Control: Pull-pull cables
Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, .041 diameter wire rear,
requires bending


INCLUDES

All balsa, lightweight colored (black and yellow) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, CA hinges and all hardware to complete this kit, instruction manual, two full-size plan sheets, and acetate sheet for windows


REQUIREMENTS

GWS IPS (indoor power system) motor with "A" ratio gear drive
GWSG2023
3 channel radio system (minimum)
2 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 8x6 prop, GWSQ2017
Building and field equipment


SPECIFICATIONS

Length: 22" (559mm)
Wingspan: 40" (1016mm)
Wing Area: 329 sq.in. (21.25 sq dm)
Airfoil: Flat bottom, high wing placement
Center of Gravity (CG): 2.5" (63mm) back from the leading edge of the wing at the fuselage side
Control Throws:
Elevator, Up and Down: 3/4" (19mm)
Rudder, Left and Right: 1" (25mm)
Building difficulty level (1=very easy.... 5=for experts
3 experienced ***
Usage experience level
Beginner ++
Remote control
Radio controlled model
Power unit
Electric motor x
Technical data
Wingspann 1016 mm
Total length 559 mm
Wing area 21,25 qdm
Construction / materials
Materials hull Holz Lasercut
Materials wings Holz Lasercut
Constructions hull Spanten und Leisten, Motorhabe tiefgezogen
Constructions wings Rippenbauweise
Covering Papier in gelb und schwarz enthalten
Remote functions
Ruder x
Elevator x
Engine x
necessary accessories for this item:
Item no.: 72616
Availability: (Delivery time: Germany 1-5 working days, foreign countries 3-7 working days)
This item notice Article is noted
3,70 EUR
incl. VAT
and excl. shipping
currently not available