Item no.: ds1811
- Description
Piper PA-20 Pacer Park Flyer Kit vrom DUMAS
Here is our new model of a Pacer, designed by Pat Tritle. Designed to use stock off the shelf flying hardware for easy affordable flight.
Kit features:
Laser cut parts
Hand-selected balsa
Full size plans
Step-by-step instructions
Vacuum-molded parts
Lightweight colored tissue
This is the radio controlled, electric powered Dumas Piper PA-20 Pacer Park Flyer Kit.
FEATURES
Construction: Hand selected laser cut balsa
Vacuum molded nose cowl
Rudder Control: Pull-pull cables
Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, .041 diameter wire rear,
requires bending
INCLUDES
All balsa, lightweight colored (black, white and red) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, one 3/4" (19mm) lightweight plastic tail wheel, CA hinges and all hardware to complete this kit, instruction manual, two full-size plan sheets, acetate sheet for windows
REQUIREMENTS
GWS IPS (indoor power system) motor with "A" ratio gear drive
GWSG2023
3 channel radio system (minimum)
3 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 9x7 prop, GWSQ2019
Building and field equipment
SPECIFICATIONS
Length: 27" (686mm)
Wingspan: 40" (1016mm)
Wing Area: 272 sq.in. (17.57 sq dm)
Airfoil: Flat bottom, high wing placement
Center of Gravity (CG): 2.5" (63mm) back from the leading edge of the wing at the fuselage side
Control Throws:
Elevator, Up and Down: 9/16" (14mm)
Rudder, Left and Right: 15/16" (23.5mm)
Building difficulty level (1=very easy.... 5=for experts | |
3 experienced | *** |
Usage experience level | |
Advancer | ++ |
Categorie | |
Model with functions | |
Remote control | |
Radio controlled model | |
Power unit | |
Electric motor | x |
Technical data | |
Wingspann | 1016 mm |
Total length | 686 mm |
Wing area | 17,57 dqm |
Construction / materials | |
Materials hull | Balsaholz Lasercut |
Materials wings | Balsaholz Lasercut |
Constructions hull | Spanten und Leisten |
Constructions wings | Rippenbauweise |
Covering | Papier |
Remote functions | |
Ruder | x |
Elevator | x |
Engine | x |