Item no.: ds1810
- Description
Tiger Moth - 35" Wingspan
By popular request we have developed an electric R/C version of our Tiger Moth. Designed to use stock off the shelf flying hardware for easy affordable flight.
Kit features:
Laser cut parts
Hand-selected balsa
Full size plans
Step-by-step instructions
Vacuum-molded parts
FEATURES
Construction: Hand selected laser cut balsa
Vacuum molded cowl and spinner
Rudder and Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, tail wire skid
requires bending
INCLUDES
All balsa, lightweight colored (black and white) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, tail wire skid, lightweight plastic tail wheel, CA hinges and all hardware to complete kit, instruction manual, two full-size plan sheets, acetate sheet for windows and vacuum molded cowl and spinner
REQUIREMENTS
GWS IPS (indoor power system) motor with "A" ratio gear drive
GWSG2023
3 channel radio system (minimum)
3 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 9x7 prop, GWSQ2019
Building and field equipment
SPECIFICATIONS
Length: 25" (635mm)
Wingspan: 35" (889mm)
Wing Area: 352sq.in. (22.74 sq dm)
Airfoil: Flat bottom
Center of Gravity (CG): 3-7/16" 87.5mm) back from the leading edge of the TOP wing
Control Throws:
Elevator, Up and Down: 1/2" (13mm)
Rudder, Left and Right: 1" (25.5mm)
Building difficulty level (1=very easy.... 5=for experts | |
3 experienced | *** |
Usage experience level | |
Advancer | ++ |
Categorie | |
Model with functions | |
Remote control | |
Radio controlled model | |
Power unit | |
Electric motor | x |
Technical data | |
Wingspann | 889 mm |
Total length | 635 mm |
Wing area | 22,74 dqm |
Construction / materials | |
Materials hull | Balsaholz Lasercut |
Materials wings | Balsaholz Lasercut |
Constructions hull | Spanten und Leisten |
Constructions wings | Rippenbauweise |
Covering | Papier |
Remote functions | |
Ruder | x |
Elevator | x |
Engine | x |