- Description
MAX Marine P359 6 - 14,4 V 350 KV
Low speed outrunner brushless motor with
high torque for marine propellers up to 90 mm diameter. Suitable for models such
as the crab cutter Sirius or the Imara Tug.
Which speed controller is suitable for the motor depends on the diameter of
the propeller and the battery voltage.
Up to 11.1 V and propeller diameter
smaller than 65 mm, the Seaking 30A article no. 67071 is suitable.
At 11.1 V
and propeller diameters of 65 to 90 mm, the Seaking 60 A item 67072 is
sufficient.
For voltages above 11.1 V, the Seaking 120A item no. 67073 is
required.
The connection sockets of the Seaking 30A speed controller have the
correct diameter of 3.5 mm. With the larger ones, it is necessary to re-solder
the sockets.
Technical data:
Type MAX Marine P359
Voltage range 6 -
14.4 V
Speed/volt 350 rpm
Housing dimensions 35x36 mm
Shaft diameter 5
mm
Connection 3x gold contact plug
Power class MAX Power 900
MAX Marine outrunner brushless motor
The MAX Marine
motor series has been specially designed for model ships. With the fan function
for additional air cooling, these motors do not require water cooling. Thanks to
the enclosed mounting frame, the motors can usually be used as an alternative
for the MAX Speed 500 to MAX Power 900 brushless motors without any further
conversion work.
Here is a selection of available types:
Item no.
42432 MAX Marine P285 6 - 14.4 V 750 KV Alternative for MAX Power 500/600
electric motors
42434 MAX Marine P358 6 - 14.4 V 910 KV Alternative for MAX
Power 800 electric motor
42433 MAX Marine P359 6 - 14.4 V 350 KV Alternative
for MAX Power 900 electric motor
42441 MAX Marine S282 6 - 11.1 V 3500 KV
Suitable for Jet Drive Power 20