Item no.: ds1812
- Description
DH-4 Park Flyer R/C Kit from DUMAS
Here is a beautiful model of the DH-4, designed by Pat Tritle. Designed to use stock off the shelf flying hardware for easy affordable flight.
Kit features:
Laser cut parts
Hand-selected balsa
Full size plans
Step-by-step instructions
Vacuum-molded parts
Lightweight colored tissue
This is the radio controlled, electric powered DH-4 Park Flyer Kit.
FEATURES
Construction: Hand selected laser cut balsa
Vacuum molded cowl
Rudder and Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, tail wire skid
requires bending
INCLUDES
All balsa, lightweight colored (blue and yellow) tissue covering, two 2" (51mm) diameter plastic main wheels, tail wire skid, CA hinges and all hardware to comlete the kit, instruction manual, two full-size plan sheets, and vacuum molded cowling.
REQUIREMENTS
GWS IPS (indoor power system) motor with "A" ratio gear drive
GWSG2023
3 channel radio system (minimum)
3 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 8x6 prop, GWSQ2017
Building and field equipment
SPECIFICATIONS
Length: 25" (635mm)
Wingspan: 35" (889mm)
Wing Area: 329sq.in. (22.74 sq dm)
Airfoil: Flat bottom
Center of Gravity (CG): 1-13/16" (46mm) back from the leading edge of the TOP wing
Control Throws Elevator, Up and Down: 5/8" (11mm) Rudder, Left and Right: 3/4" (20mm)
Building difficulty level (1=very easy.... 5=for experts | |
3 experienced | *** |
Usage experience level | |
Advancer | ++ |
Categorie | |
Model with functions | |
Remote control | |
Radio controlled model | |
Power unit | |
Electric motor | x |
Technical data | |
Wingspann | 889 mm |
Total length | 635 mm |
Wing area | 22,74 dqm |
Construction / materials | |
Materials hull | Balsaholz Lasercut |
Materials wings | Balsaholz Lasercut |
Constructions hull | Spanten und Leisten |
Constructions wings | Rippenbauweise |
Covering | Papier |
Remote functions | |
Ruder | x |
Elevator | x |
Engine | x |